AO50
AO50

R1,700 ex VAT

In stock (can be backordered)|If not in stock, the common lead-time is 7 working days.

Add to cart This product has multiple variants. The options may be chosen on the product page
🔍
AO50

AO50

R1,700 ex VAT

The AO50 is a frameless, six-sided, high-performance, multi-layer composite acoustic absorber. It is shipped as a complete solution, ready to install. It effectively absorbs sound down to 63Hz and below and can be used as a “bass trap”, all of this in only 50mm of depth.

SKU: AO50 Category: Tags: ,

Most simple wall panels do not operate effectively across a wide enough frequency range and absorb too much of the upper frequencies, leading to rooms with unbalanced acoustics that sound dull and boomy. Despite its shallow depth of only 50mm, the AO50 effectively absorbs sound down to the bass frequencies found in music, resulting in a room with balanced acoustics leading to better Acoustic Comfort. It scatters and diffuses upper frequencies so that the room does not sound small and claustrophobic.

Typical installation time is just 5 to 6 minutes if the installation has been planned, the site is ready, and the tools are to hand.

The AO30 is supplied complete and ready to install. In the box you will find:

  • Wall panel absorber
  • French cleat for wall mounting
  • Fischer DUO Power wall plugs and screws.
  • Double-sided tape to stabilise the panel.
  • Installation instructions.
  • Validation code to authenticate the panel and to register its ownership.
Shipping Weight 4.3 kg
Shipping Dimensions 103 × 53 × 9.5 cm
Dimensions: h/w/d (cm)

100/50/5
Product weight (kg)

3.50
Colour

Black, Charcoal, Light Grey
Operating temperature range

0-40℃
Installation method

L – Bracket, lockable
Circularity

95%
Noise Reduction Coefficient

0.9
Absorption Class

A

Reviews

There are no reviews yet.

Be the first to review “AO50”

Your email address will not be published. Required fields are marked *

Since the AO50 is frameless and non-traditional, traditional testing methods could not be used to assess the performance of its five faces.  Standard testing typically evaluates the acoustic performance of one face. The supplied performance figures are based on measurements taken before and after treatment, which were used to determine the effective absorption performance. If your modelling system does not accept absorption ratios greater than 1.0, normalise to 1.0 (but know that it is better than modelled) or increase the surface of the modelled element to include the side surface area. A scattering index of 0.5 to 0.7 should be used, depending on how the product is installed and proximity to other AO80 devices.

 

Acoustic Cushions
Acoustic Cushions
AB9
AB9
AI13L
AI13L
AL60
AL60